Wondering how to fix “KMode Exception Not Handled Error 0x0000001E” Windows error? This error typically occurs on the Windows 10 operating system and will be accompanied with a BSoD (Blue Screen of Death).
BSoDs usually indicate a serious problem because they usually happen due to an issue with a driver or hardware. This critical error can be tricky to fix, especially if they end up in an endless restart loop.
A BSoD isn’t caused by an app. The reason is usually something internal. They happen when Windows gets a ‘STOP Error’. In this case, the PC will create a mini dump so it can store important information about the crash.
These files get saved to your disk. After encountering a BSoD, Windows restarts the PC automatically.
Open the Control Panel then Security and Maintenance and then the Action Center to see information about the BSoD and to troubleshoot this error and check for recommended fixes.
“Kmode Exception Not Handled” Error Tips
- If the PC gives you a BSoD whenever you restart, boot up in Safe Mode so only the essential drivers will load.
- See whether System Restore helps. This takes your PC back to a previous state before the error occurred. Usually it can help if the error is caused by software.
- Run a malware scan to check if your PC has a virus. Use your chosen antivirus program to perfect the scan.
What Does this Error Mean Exactly?
It can be frustrating trying to figure out why you are getting the ‘KMode Exception not Handled’ error.
It occurs when you have applications overwriting into one another’s memory. This causes the BSoD and will ultimately result in suffering a full system crash.
The good news is this error can be easy to fix.
When the 0x0000001E error occurs, you will see the following error message:
“A problem has been detected and Windows has been shut down to prevent damage to your computer“
“Technical Information: STOP: 0x0000001E (0x0000001E, 0x0000001E)“
Causes of Error 0x0000001E
These issues can cause the error “KMode Exception Not Handled Error 0x0000001E”:
- Incompatible software applications.
- Corrupted system services or software.
- Faulty device drivers after a recent Windows upgrade or an outdated, misconfigured or corrupt device driver.
- Malfunctioning RAM causing read and/or write errors.
- Another problem with the hardware.
How To Fix KMode Exception Not Handled Error 0x0000001E
There are various ways to solve the ‘KMode Exception not Handled’ issue, so let’s look at some solutions which might be helpful.
Solution #1: Disable Fast Startup
This Windows 10 feature allows quick recovery from the Windows hibernation and shutdown modes.
It doesn’t eliminate driver problems though and just loads them back.
This is how to disable fast startup in Windows 10:
- Go to the Start menu and open the “Control Panel“.
- Navigate to “System and Security” and select “Power Options“.
- Click “Choose What Power Buttons Do“.
- Find the Turn on “Fast Startup” setting under “Shutdown Settings” (make sure it is unchecked)
Save your changes and restart the machine.
Solution #2: Check the RAM
A faulty RAM can cause the error and you can verify whether this is the case by using the Memory Diagnostic Tool included with Windows 10.
- In the search bar, search for “Windows Memory Diagnostics“.
- Right-click to open it as an administrator.
- Select “Restart Now” and “Check for Problems” and wait for the scan to run.
If any errors show up, this means your RAM is faulty and the likely cause of your BSoD.
Solution #3: Disable or Update Your Drivers
Windows will usually tell you which driver is responsible for an error if a device driver is causing it.
If so, it should be in brackets in the error message. Once you have identified the problematic driver, do the following:
- Type this in the search bar: Device Manager.
- Locate the driver responsible for the error.
- Right-click on it and select “Update Driver“.
- Select “Search Automatically for Updated Driver Software” and follow the instructions on the screen.
If this doesn’t work, check the driver manufacturer website for driver updates and download the newest one.
After that, manually update the driver by choosing “Browse My Computer for Driver Software” (not Automatic Search).
Solution #4: Uninstall Incompatible or Corrupt Software
If a malfunctioning driver is not responsible for the BSoD, it might be down to software incompatibility.
Uninstall anything you installed recently and then restart the computer to see whether that fixes the error.
Solution #5: Check Hardware Compatibility
If you get the 0x0000001E error message after upgrading your Windows operating system, the system might have an incompatibility with one of the hardware devices.
Refer to Microsoft’s documentation to find out if the computer is compatible with the latest version of Windows.
A Final Words
A ‘KMODE_EXCEPTION_NOT_HANDLED (0x0000001E)’ error can cause a BSoD but hopefully one of the above fixes will solve the problem.
You don’t have to be particularly tech-savvy to try the above solutions.
If you still haven’t repaired it, it might be time to replace your RAM or consult a professional technician.